Still Shot2 soft box Video/ Photography Light Diffuser

SOFTBOX LIGHT DIFFUSER ASSEMBLY

Assembling the Still Shot2 soft box can be a little tricky, not to worry though we have you covered. Just follow these simple steps and you will be done in no time. You will need a 3 foot by 3 foot table for work space.
What’s included in the Still Shot2 Light Diffuser Soft Box? Glad you asked! Your kit includes Outer Skin, Steel Rods, Speed Ring, Inner Diffuser, and Outer Diffuser.
Let’s Get Going With Step 1:
Unfold the outer skin and insert the speed ring. Just put the edge of the skin into the groove of the speed ring. Make sure the holes are in line to receive the rod ends. Now insert one of the rod ends into the capture pocket of the outer skin. Next put the other end into the the speed ring capture hole. Now do the opposing side, put the rod through the pocket and into the speed ring capture hole. Pull the outer skin tight and with pressure on the rod pull the Velcro flap over the rod end. The other side is done in the same way. For the last rod you may need to twist the steel rod a bit to make it fit. It will be a very tight fit!
Your Still Shot2 soft box Video light Diffuser is almost done! Next step is the inner diffuser.
The inner diffuser is optional, it does not substantially improve dispersion of the light but it will reduce the light output. Installing the inner diffuser is a simple matter of attaching the corner Velcro to the Velcro tabs inside the soft box.
Start with one corner then the opposing corner and finally the last 2 corners. Use only about ½ of the Velcro tab on the soft box outer skin, leaving space between the diffuser and the side of the soft box. The inner diffuser does not fit tight against the side of the soft box. There is a gap of about 1” for ventilation.
The outer diffuser is also optional; you could successfully use the soft box with only the inner diffuser. The outer diffuser fits over the edge of the outer skin and there are Velcro attachments all around.
Well that is it! Now attach the Still Shot2 Light Diffuser Soft Box to one of our Still Shot2 Studio Lights and you are ready to take professional pictures or videos.
You may still be confused…don’t worry we have your back…Just click the link to watch a step by step video of the Still Shot2 Soft Box Video light Diffuser
http://www.youtube.com/watch?v=11Ai8P88Y2Y
Visit www.stillshot2.com or www.prohoists.com for all your photography needs. Until next time, be safe out there.